We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Angel4
Moor Amps Angel 4 Power Amplifier
Please contact us to discuss availability
A note about availability and shipping
£5,995.00
Angel-4 Power Amplifier
The Angel-4 uses the same design and principles as the Angel-6, scaled down for more domestic compatibility.
Now on demonstration at Phonostage Audio, this is an amazing and beautiful amplifier. More dynamic and transparent than anything we have had here at the time of writing! Check out reviews by Jason Kennedy (ear) and of course Tarun (British Audiophile).. actually there is not a bad word said anywhere! If you are serious about your amplification and want to listen to this get in touch..
By using only top quality components and combining low-feedback design with high current delivery, this design will make you believe the music is being played live in the room. The Angel 4 is designed to drive mainstream loudspeakers to high levels, where other amplifiers start to compress and sound strained.
'We extend our low-feedback philosophy to the power supplies. The low-feedback amplifier is fed with incredibly pure, high current DC rails from low-feedback regulators.
The heavy machined casing uses different panel thicknesses to damp each other out and avoid vibration reaching the amplifier components.
The highly linear output stage uses 4 ring-emitter transistors to share the current load and remain linear, even when supplying large currents to keep a grip on the speakers.'
The Angel-4 combines the world of pure low-feedback with the high output currents needed to deliver the whole authentic musical performance. It delivers musicality and subtlety along with power, scale and dynamics. It delivers Music!
Output Power
75W RMS per channel into 8 ohms
150W RMS per channel into 4 ohms
Distortion
( with typical loudspeaker load )
THD: < 0.01%
IMD: < 0.01%
Loudspeaker Outputs
Nominal: 4 ohm to 16 ohm
Connections: Wired, Spade or 4mm plug
Inputs
RCA (phono) inputs:
1V rms for full output
Input Impedance 15k ohm
Frequency Response
5Hz to 50kHz +/- 1dB
Protections
Short Circuit or Overload: +/-15A max
Overtemperature: +55C
Undertemperature: +5C
Measurements
Amplifier dimensions:
Width 430mm x Depth 340mm x Height 120mmWeight 16kg
Packaged dimensions:
Width 490mm x Depth 420mm x Height 170mm
Weight 18kg
Mains Power
IEC inlet cable for 230V AC 50Hz mains
Optional 115V AC 60Hz version available
Power Consumption:
Maximum 650VA
Idle 50VA
Standby < 0.5W
| EAN | 7626015600269 |
|---|---|
| Product Weight | 18.00kg |
| Brand | Moor Amps |
| Model | Angel 4 |
| Type | Integrated |
| Output Channels | Stereo |
| Power Output (RMS Per Channel) | 75W RMS per channel into 8 ohms, 150w into 4 ohms |
| Connectivity (RCA/Optical/Bluetooth etc.) | L/R RCA, Banana Plugs, Spade Connectors, Bare Wire Terminals |
| Remote Control | Handheld Remote |
| Colour/Finish | Satin Black |
| Warranty | 2+ Years Manufacturers Warranty |
| Product Width | 430cm |
| Product Depth | 340cm |
| Product Height | 120cm |
Write Your Own Review