We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
6000APX
PX Bargain Audiolab 6000A Amplifier with Built In DAC
In Stock Now!
A note about availability and shippingThis is a very clean Audiolab 6000A amplifier part exchanged by our customer. This is complete with manual/remote etc. and works perfectly.
This has built in DAC and is a great hub for all your music sources. This is in stock now and will be sent out next day delivery.
This does not have it's original box but we have lots of packaging around here and this will be packaged well and sent out securely with tracking. Also the speaker connections have been changed because one was damaged in a move when the previous owner had it.
All the specs are below! These are £649 new so this is a real bargain! Priced to clear!
Overview
Outwardly, the 6000A bears strong resemblance to the 8300A with its rotary controls and large, central OLED display. Unlike its costlier, analogue-only sibling, it incorporates high-quality D/A conversion, enabling digital sources to be connected directly without an external DAC. It supplies four digital inputs, three line-level analogue inputs, an input for a turntable, wireless connectivity via Bluetooth and a dedicated headphone amp, in addition to its ability when driving loudspeakers.
Technology
Digital circuitry
Much effort has been made to ensure the 6000A’s digital circuitry delivers the level of quality one might expect of a high-performance standalone DAC. As ever, Audiolab has turned to the ES9018 Sabre32 Reference chip family to perform D/A conversion, utilising ESS Technology’s 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver ultra-low noise and high dynamic range.
Analogue circuitry
The 6000A’s discrete Class AB power amp stage delivers 50W per channel into eight ohms, with a maximum current delivery of 9 Amps into difficult loads. The output stage of the discrete power amp circuits uses a CFB (Complementary Feedback) topology, ensuring superior linearity and excellent thermal stability, as the idle current is kept independent of the temperature of the output transistors.
A substantial 200VA toroidal transformer, followed by 4x15000uF reservoir capacity (60000uF in total), helps the amp to maintain firm control of the music whilst enabling excellent dynamic range.
A substantial 200VA toroidal transformer, followed by 4x15000uF reservoir capacity (60000uF in total), helps the amp to maintain firm control of the music whilst enabling excellent dynamic range.
The preamp section is kept as simple as possible to maintain signal purity, with line input signals passing to a precision analogue volume stage. The latter covers the range from -80dB to +8dB in steps of 2dB and 1dB (step resolution increases with volume position). Much effort has gone into the physical layout of the 6000A’s circuitry, protecting the sensitive preamp section from noise interference.
6000A Specifications
| Gain (max.) | +8dB (Line) |
| +55dB (Phono MM) | |
| Input Sensitivity | 720mV (Line, Volume = 0dB) |
| 3.1mV (Phono MM, Volume=0dB) | |
| Input Impedance | 10K (Line) |
| 47K//100pF (Phono MM) | |
| Total Harmonic Distortion (THD) | < 0.0004% (Line, 1KHz @ 2V, Volume = 0dB) |
| Frequency Response | 20Hz-20kHz (+/-0.1dB) |
| Output Voltage | 2.3V max. (Volume = 0dB) |
| Output Impedance | 120Ω |
| Signal-to-Noise Ration (S/N) | > 110dB (Line, A-weighted) |
| >76dB (Phono MM, A-weighted) | |
| DAC | |
| D to A converter | ES9018K2M |
| Total Harmonic Distortion (THD) | < 0.0006% (1kHz @ 0dBFS) |
| Output level (0dBFS, 1KHz) | 2.05V |
| Max. Sampling Frequency | 192kHz |
| Signal-to-noise ratio (S/N) | > 112dB (A-weighted) |
| Digital Filters | Fast Roll-off , Slow Roll-off , Minimum Phase |
| Power Amplifier Section | |
| Gain | +29dB |
| Rated Max. Power Output | 2 X 50W (8Ω, THD<1%) |
| 2 X 75W (4Ω, THD<1%) | |
| Frequency Response | 20Hz-20kHz (+/-0.3dB) |
| Input Sensitivity | 720mV |
| Total Harmonic Distortion (THD) | <0.003% (1kHz @ 40W/8Ω) |
| Signal-to-Noise ratio (S/N) | > 110dB (A-weighted) |
| Max. Output Current | 9A |
| Headphone Amplifier | |
| Total Harmonic Distortion (THD) | < 0.01% (1kHz, 50mW) |
| Output Impedance | 2.35Ω |
| Load impedance | 20-600Ω |
| General | |
| Standby Power Consumption | <0.5W |
| Power Requirements | 240V ~ 50 - 60Hz |
| 230V ~ 50 - 60Hz | |
| 115V ~ 50 - 60Hz | |
| 100V ~ 50 - 60Hz | |
| Dimensions (mm) (W x H x D) | 445 x 80 x 330mm including feet, terminals and controls |
| Carton Size (mm) (W x H x D) | 512 x 467 x 146 |
| Weight | 7.8kg (Net) |
| EAN | 7626013569742 |
|---|---|
| Product Weight | 6.00kg |
| Brand | Audiolab |
| Model | 6000A |
| Output Channels | Stereo |
| Connectivity (RCA/Optical/Bluetooth etc.) | Bluetooth, Digital Optical, Digital CoAxial, Banana Plugs |
| Remote Control | Handheld Remote |
| Warranty | Store Warranty (See Description) |
Write Your Own Review