Edwards Audio TT6 Turntable with Carbon Fibre EA6 Tonearm
Edwards Audio TT6
The Edwards Audio TT6 turntable, complete with dust cover, proudly features the new in-house designed and manufactured A6 captive unipivot carbon fibre tonearm and illuminated plinth.
(Please note this item is for shop collection only - Units are supplied to order so if you would like any information about timescales or if you would like any advice about setting up then please contact us).
The Edwards Audio TT6 turntable, built by the well-established and revered Edwards Audio, home of Talk Electronics. This is a British built, superbly engineered and stunning looking turntable available in three superbly finished colours. The TT range now comes with the easy-adjust VTA collar and a striking Z-type perspex dust cover, colour co-ordinated to the deck. An example of such a dust cover can be seen in the last picture (Modelled on the lovely TT4 in grey!) We are very taken with this particular turntable here at Phonostage Audio and we will be keeping an Edwards Audio turntable here on demo!
By the way... a couple of things. Firstly sorry about the poor quality photo! I am waiting for some more to be sent over then I can update these. Secondly these decks are all made to order and there will be a bit of a lead time on these, maybe three weeks or so. Check with us first if you need anything more specific and we can check with Edwards Audio.
This is excellent engineering at an excellent price!
The low mass tonearm is constructed from carbon fibre and is fitted with a 65-gram stainless counterweight. The output terminates to a pair of RCA sockets with separate ground, giving the user choice over their output cabling – these are located on the underside of the plinth.
The elegant 25mm Medite plinth is available in a satin black, red and white finish. Machined in-house the turntable boasts a 17mm acrylic platter and an aluminium hub which runs on a custom 18mm brass bearing housing with a 5mm white ceramic thrust bearing.
The turntable is controlled by a 24V AC synchronous motor which in this new series of Edwards Audio turntables has been positioned to further reduce electromagnetic and mechanical noise. This has required the development of a new bespoke ‘big belter’ drive belt. The result allows for greater resolution of low level detail.
This turntable does require setting up when it arrives with you. Just to be clear, there is no cartridge installed on the presumption that at this level you just might have (or have your eye on) your own chosen cartridge. You will need to use of stylus scales to set the weight accurately. These are inexpensive and we do sell them and we think everyone should have a set! (and of course this turntable does not have an incremental dial on the counterweight due to the low-centred design). We cannot be held responsible for any damage caused by incorrect set-up or set up attempts, so please be careful and consult with us if you need any help... We love to help and we love talking about turntables!
Also with regard to lead-times: If the model colour you select is in stock here or at Edwards Audio, you can expect to receive your order within a few days. However you may need to wait while your deck is made to order, in which case there could be a wait of two to three weeks. We definitely think these are worth the wait and we will keep in touch with you and with the nice chaps at Edwards Audio so you know where things are up to. Ask us of course if you have any questions.
Thanks all and happy listening!
NB should you wish to upgrade further, the superb SC5 outboard speed controller is also available as an option with this turntable...
|Brand||Edwards Audio / Talk Electronics|
|Turntable Features||Belt Drive|
|Drive Type||Belt Drive|
|Speed Settings||33 rpm, 45 rpm|
|Warranty||2 Years Manufacturers Warranty|