Graham Audio LS8/1 Loudspeakers
The LS8/1 is Graham Audio's take on the classic 8 inch bass driver in a 2 cubic foot box format, as used by many designers over the years, including the legend himself, Derek Hughes (and his father Spencer, who of course designed the BBC LS3/6).
We are huge fans here of all speakers of that heritage and I am a die-hard BC1 restorer, owner and listener and I have heard and reviewed the 8/1 and love it! Check out my review of the Dereh Hughes Signatory set we have here on demo!
Check out the review here.. This listing is for the standard finish - a lovely veneer! If you would like to discuss any other veneers please contact us. Also note these are priced and listed WITHOUT stands.. If you also want stands, again please contact us (we might just have a pair of Derek Hughes' signature models up for grabs!!)
Of those fabled early speakers, some suffered from reliability problems because of limited power handling. Some had a bass response that didn't work optimally in domestic listening environments. But many were able to give hi-fi enthusiasts their first taste of studio monitor neutrality, especially through the midrange, thanks to the "thinwall" cabinet construction and the innovative - for the time - use of plastics for the mid-bass driver diaphragm.
The Graham Audio LS8/1 draws on decades of experience and modern techniques. High temperature motor design and materials permit much greater power handling than ever, while building on the midrange openess and resolution of the original LS3/6. Sophisticated soft-dome units are used for the tweeter and super-tweeter, both with protective metal grilles, and in common with many Graham Audio designs, the HF level can easily be adjusted from the front panel to help match the loudspeakers to the acoustic environment they are being used in. To do so, the grille can readily be removed as it is held in place with concealed magnets. As with the original LS3/6, the front and rear panels are attached to the cabinet with srews rather than glued joints, helping to reduce colouration by decoupling the panels, and easing future maintenance, should that become necessary. High quality birch ply is used beneath the premium hand-matched veneers.
|System||3 Way, reflex loading|
|Enclosure||Thin wall damped construction, birch plywood|
|Finish||Real wood veneer|
|Dimensions (w/h/d)||30cm by 63.5cm by 30cm|
|Frequency response||45Hz to 20kHz, ±3dB|
|Sensitivity||87dB SPL (2.83V, 1m)|
|Maximum output||Over 100dB for a pair at 2m|
|Tweeter||26mm soft dome|
|Super tweeter||19mm soft dome|
|Recommended amplifier power||50 to 250 watts unclipped programme|
|Brand||Graham Audio / Chartwell|
|Speaker Type||Stand Mount Speakers|
|Connectivity (RCA/Optical/Bluetooth etc.)||Banana Plugs|
|Power (RMS Per Channel)||50 to 250 watts unclipped programme|
|Warranty||5 Years Warranty|