Graham Slee Libran Balanced Interconnects - Stereo Pair
Libran Balanced Interconnect Cable
We love the range of Graham Slee Cables, tried and tested by ourselves - in fact we own some Lautus and Cusat Interconnects for our demo set-up.. they seem to add nothing - and take absolutely nothing away, which is exactly what we need for our auditioning set-ups - not only that but these are hand assembled, individually tested and superbly engineered!
In fact we have a much loved set of Libran Cables for use with our own Majestic!
As with all Graham Slee products these are handmade to order by by the nice chaps at Graham Slee and it does usually take a couple of weeks to get these to you. However! It is well worth the wait in our opinion!
In A Different League To Microphone Cables
Looking for balanced audio interconnects? The Libran balanced interconnect cable betters the specifications of standard microphone cables and will give you detail, dynamics, and clarity.
Balanced audio leads for both long and short balanced interconnections such as equipment-to-equipment or equipment-to-powered speakers needing a balanced audio cable - the Libran is an excellent balanced audio interconnect.
Available in paired lengths of your choice and terminated in gold plated Neutrik XLRs and/or Neutrik TRS-wired jack plugs .
NB. The pattern in the braided jacket may vary between batches.
Balancing The Sound Scales
Appropriately named Libran because they're balanced cables, the Librans are graceful in their signal handling.
Recommended for use between the Majestic pre-DAC balanced TRS output jacks and the balanced XLR inputs of the Proprius power amplifiers.
Having a similar dielectric constant to polypropylene the Libran's insulation is a "fast substrate" making it low-loss.
Unlike polypropylene the Libran is far more flexible and will form a bend radius down to 7cm.
It is ultra-low capacitance at only 45pf/m across phases, and 75pf/m either phase to shield.
Excellent balance and noise rejection is achieved through its twisted pair construction and foil plus braid shielding which is connected at both ends.
All terminations give 360° shielding for high interference immunity.
The Libran is suitable for use in both low-impedance, and (up to) 600 Ohm balanced systems.
|Available terminations||XLR male; XLR female; TRS jack plug: 3-circuit|
|Capacitance across phases||45pf/metre (13pf/foot)|
|Capacitance phases to shield||75pf/metre (23pf/foot)|
|Voltage rating||300V rms|
|Lay-up||Close-coupled slow twist pair|
|Shield||90% tined copper braid over aluminium foil + drain wire|
|Jacket and braid||PVC|
|Suggested Direction||Marked extrusion direction|
Specifications subject to alteration without notice in keeping with the manufacturer's improvement policy.
I've just got some GSP Libran balanced cables to go between my Majestic and active Harbeth speakers in my study system, which aside from captive leads from turntables was the last non-GSP link. The improvement over the single-ended phono cables was very apparent, with more detail and dynamics, and clarity. Definitely recommended!
- forum member: (Bob Wood) Surrey
|Model||Libran Balanced Interconnect|
|Intended Use||Balanced Cables|
|Single Wire or Pair||Pair|
|Warranty||1 Year Manufacturers Warranty|